Обзор нашей продукции:

От перемешивания сырья до выдачи готового изделия осуществляется ряд технологических операций, в которых участвуют многие компоненты установки. Четкое взаимодействие компонентов установки и оптимизация производственных процессов становятся залогом экономически эффективного производства. Познакомьтесь с нашим камнеформовочным оборудованием.

От смешивания сырьевых материалов до выдачи готового изделия (бордюрного камня) осуществляется ряд технологических операций. Бордюрные прессы фирмы "Маза" были расзаботаны с учетом требований "британского стандарта", применяемого к бордюрному камню. "Британский стандарт" действителен в Великобритании и странах Ближнего Востока и по сей день. Познакомьтесь с нашей технологией производства бордюрного камня.

В производстве газобетона высокие требования предъявляются к предварительной подготовке и дозированию сырьевых материалов, контролю процесса ферментации, а также к автоматическому управлению всеми производственными процессами. Газобетонные установки фирмы «Маза» технологически совершенны и проектируются согласно индивидуальным требованиям Клиентов. Концепции наших заводов гарантируют высокую экономическую рентабельность, оптимальный ход технологических процессов и неизменно высокое качество готовых изделий. Приглашаем Вас познакомиться с нашими газобетонными установками.

Это долгий путь, который сырьевые материалы проходят от приготовления смеси до выпуска готовых изделий. Здесь задействовано множество технологических компонентов. Только если отдельные части установки согласованы между собой, можно обеспечить бесперебойность всего процесса и эффективную эксплуатацию силикатного завода. Приглашаем Вас познакомиться с нашей технологией производства силикатных изделий.

Наша сервисная служба

Установки и оборудование фирмы "Маза" монтируются в вводятся в эксплуатацию силами опытных специалистов компании. При этом фирма "Маза" делает ставку на квалифицированный персонал, обученный в Германии. Узнать больше о монтаже и вводе в эксплуатацию Вашей производственной линии.

Сервисное обслуживание фирмы "Маза" выходит далеко за границы монтажа и ввода в эксплуатацию установки и опирается на специальное ноу-хау и более чем 110-летний опыт в отрасли. Ознакомьтесь с широким спектром предлагаемых сервисных услуг.

У Вас возникла необходимость в технической поддержке при эксплуатации Вашей установки? Отдел техподдержки фирмы "Маза" нацелен на качество и доступность предлагаемых услуг. В рамках технической поддержки оказывается "скорая помощь" при возникновении технических проблем, загружается обновление программного обеспечения, производится расширение функций производственной линии или решаются технические вопросы различной степени сложности. Получите больше информации прямо сейчас.

Одной из предпосылок увеличения прозводительности и качества оборудования является постоянное повышение квалификации персонала, обслуживающего линию.
Полученные знания и ноу-хау быстро себя окупят: помимо наличия качественного и надежного оборудования "Маза" большое значение имеет осведомленность Вашего персонала о всех имеющихся функциях, тонкостях управления и точных настройках. Узнайте больше об обучении персонала Клиентов, предлагаемом фирмой "Маза".

Получите более подробную информацию

Новости фирмы "Маза"

Новости и пресс-релизы

Fascination of the bauma - traditional company presented a large number of new and further developments

Munich 22 апр. 2016 г. - The trade fair appearance of the traditional German company Masa at the 31st world-leading fair for construction machines, building material machines, mining machines, construction vehicles and construction equipment in Munich once again offered lots of space for the presentation of technical innovations and expert discussions.

The trade fair booth, which extended over two floors, impressed visitors even at first glance with monumental exhibits. Guests and friends from all over the world were welcomed on a total booth area of 740 m².

Masa exhibited various plant components for the production of concrete blocks, sand lime bricks and AAC Products. The Masa HDP 800 sand lime brick press, e.g. left a lasting impression: with a height of 5.8 m and a weight of 36 t, the press was both the largest and heaviest exhibit at the Masa booth.

Three interactive beamer systems were used for the presentation of the Masa product range. These 100-inch projection screens were hugely popular on both levels of the Masa booth. Their playful character paved the way for the visitor to quickly enter the Masa product world. Moving 3D views invited one to look into the details.

With regard to the exhibits, the main attractions were the Masa XL 9.1 concrete block making machine, the Masa Cuboter and the Masa Splitter 1250.

Masa XL 9.1 concrete block making machine

The XL 9.1 in particular packs quite a punch: In addition to well-known high-tech features, the near-series prototype exhibited sprang some surprises with the following new features/innovations:

Servo pump for main filling box with MLC controller (successor of Mac 8)

In this system, two axial piston pumps connected in series are driven by a synchronous servo motor. The pressure and volumetric flow rate are regulated by control of the speed and the adjustment of the pivot angle. Additional flow control valves are no more required with this system.

This system proves to be particularly energy-efficient:

  • Energy is recovered from the oil flowing out.
  • No pressure drop at the flow control valves.
  • Power consumption in standby mode is very low.
  • There are only minimal losses due to less friction.
  • Lower heat is generated, hence the cooling power is reduced.

Masa expects savings of 15-20% compared to conventional hydraulic systems.

Face mix concrete Filling box with driven base

The execution with a driven base ensures the optimum distribution/supply of coloured face mix concrete to the filling box. The filling box drives forward with the base closed; as it drives back again, the base opens and the mould is filled.

Magnetic compaction head lock

Permanent magnets are used in magnetic compaction head lock; they are energised only for the magnetisation and demagnetisation. During operation, therefore, the magnets are de-energised and maintenance-free during operation.

Vibrating table amplitude monitor

Non-contact sensors are mounted underneath the vibrating table. These measure the amplitude of the vibrating table during production if necessary. This allows better planning of the manufacturing process and pending maintenance work.

A multi-colour system was presented above the Masa XL concrete block making machine: Coloured concrete is fed by rotatable dosing belts onto a mobile collection belt and transported to the face mix machine silo. The system allows reproducible colour repetitions at all times.

As the “highlight”, a face mix concrete mixer type S 350/500 was installed on the top platform of the Masa stand. This mixer is extremely well suited to the production of high-quality multi-colored face mix concrete products.

Masa Cuboter

The here exhibited Cuboter is distinguished by modern energy-saving servo technology. By DC link system and innovative robotic technology optimal flight curves (trajectories) can be realized. Thus, the cycle time is optimized and the installed capacity and energy consumption is reduced also it simplifies operation.

Interesting for the visitors: both the XL 9.1 concrete block making machine and the Cuboter could be seen in action and demonstrated their potential on spot.

Masa Splitter 1250

The latest version of the “big” Masa Splitter with a maximum splitting width of 1,250 mm was well worth seeing even in the disconnected state. The splitter consists of a stable frame construction and a flexibly-mounted splitting unit. Thanks to the special mounting of the splitting unit there are many adjustment options, allowing optimum adaptation to the product. Thanks to the product-related adjustment options, ideal splitting results are achieved in terms of the fracture behaviour and the breaking force to be applied.

Masa presented new camera system concept

In addition to impressive machines, Masa also had on offer the concept of a new camera system. The current Masa remote maintenance hardware can be expanded by a certain number of high-definition cameras. The production process can be monitored and documented in video sequences, even over a longer period. Remote plant components such as mixers or the delivery of raw materials can be directly monitored from the control station via cameras. For the plant operator this means a considerable saving of walking distances and time. Convenient for the customers: Masa can deliver a complete package, so that no other further devices are needed.

However, the new Masa concept features more than that: the live integration of Masa F-E-S Support is possible via an encrypted high-speed data connection via Redbox. The operator is given even greater flexibility and mobility through the use of his own Smartphone or tablet. Using the camera function, plant sections can be individually filmed, viewed live and recorded via integrated WLAN hotspots. Depending on the transmission rate, the sequence can then be made available to Masa Service either directly as a live stream or as a saved video file and provides for a further enhancement of the communication between customers and MASA Service.

bauma 2016