Our products at a glance:

It's a long way from raw materials through the mixture to the finished stone. Many plant components are involved in this process. Only if the system components are matched, can one be assured of a smooth process and economical operation of the block making plant. Learn about our Concrete block production plants.

It's a long way from raw materials over mixture to the finished (Kerb)stone. Masa Kerbstone presses were developed to fulfill among other criteria, the special requirements of the "British Standard" kerbstones. This "British Standard" is still a condition in countries of the Middle East and the UK. Learn about our Kerbstone production plants.

The manufacturing of autoclaved aerated concrete products demands high standards for mixing and dosing of the aggregates, the control of the fermentation process and the control of each production step. Masa's aerated concrete installations are proven advanced technology processes, designed according to customers specific requirements. This approach allows complete solutions to ensure highly efficient, optimised processes resulting in consistent final product quality. Learn more about our plants for the production of AAC.

It's a long way from raw materials through the mixture to the finished sand lime bricks. Many plant components are involved in this process. Only if the system components are matched, can one be assured of a smooth process and economical operation of the sand lime brick production plant. Learn about our Sand lime brick production plants.

The slab press UNI 2000 is the heart of any plant for the manufacture of concrete slabs. In addition, dosing and mixing plants, take-off devices with direct washing units and storage systems as well as machines and equipment for slab refinement and packaging are required. Masa can offer the complete know-how for the production of concrete slabs. This is the decisive advantage for our customers: Planning, design, manufacture, assembly, commissioning, training, maintenance and continuous support during production – all from one supplier. Learn about our Concrete slab production plants.

Masa LithoPore® is a mineral building material that is processed into a vapour-permeable thermal insulation panel. Learn more about Masa-LithoPore®

Our service:

Masa plants and machines are installed and commissioned by our own experienced fitters. Masa relies on qualified personnel, trained in Germany. Read more about the assembly and commissioning of your production line.

The Masa Lifetime service extends far beyond the actual assembly and commissioning of a plant. Masa can rely on specific know-how and an industry experience of more than 110 years. Find out more about the wide range of Masa Lifetime services.

Do you need support with your machine? Masa Support scores in both quality and significantly improved accessibility. Whether "first aid" for technical problems, updates, functional expansions of your production plant or technical questions, the know-how provided by Masa Support covers a wide range of services. Get information now.

One of the keys to increasing productivity and quality is continuous training of the machine and maintenance personnel.
The acquired know-how will pay off quickly: You and your employees only know how good a Masa machine or plant actually is, if all functions, tricks and fine adjustments are known. Learn more about Masa Customer training.

Are you looking for your contact? The Masa Service team introduces itself. All contact details can be found here.

Get more information about us:

News from the Masa Group

Latest News and press releases


Masa presents new, service-oriented features

Concrete mixers PH 2000/3000 and S 350/500

Andernach 3 Aug 2022 - Masa will be exhibiting the PH 2000/3000 mixer optimized for main mix concrete production and the special S 350/500 face mix mixer at bauma 2022, along with other interesting exhibits. For both models, Masa engineers developed new, service-oriented features over the past months, which will be shown there for the first time.

The quality of raw materials plays a decisive factor in being able to achieve a homogenous mix of high-quality concrete inside the mixers. Both the raw materials and mixers significantly influence the appearance and performance of the finished concrete products. The production of main mix and face mix concrete have different criteria meaning the respective mixers require specific solution-based approaches. While in main mix concrete production, the primary requirement is to achieve the highest possible quantity of concrete while maintaining the quality, the focus in face mix concrete production is on achieving the highest possible quality while limiting the quantity to small batches. In addition to the pure performance of a mixer, plant operators value its serviceability and ease of maintenance.

Stagnation is regression

That is why the mixer specialists at Masa do not lose sight of continuing to optimize our products. Both small, detailed modifications and larger improvements to the concrete mixers contribute in total to results that can be proud of.

The modifications to the PH 2000/3000 as well as to the S350/500 that will be presented at bauma 2022 are aimed at optimizing both the function of the mixer and the ease of maintenance.

PH 2000/3000

  • Modification baffle plates: Following analyses in various customer plants, Masa has now moved the baffle plates installed below the mixer to the top, which has significantly improved the uniformity in the filling of the bucket conveyor. Local cone formation or segregation, but also subsequent adhesion should be avoided.
  • Large inspection opening: Continuously assessing the degree of wear to the ring gear, pinion, and motor as well as monitoring the level of gear oil is essential for high plant uptime. Masa engineers have now developed a very convenient inspection opening for this purpose. The easily removable shutter of the opening has a diameter of 460 mm giving the plant operator a comprehensive, and if necessary, camera-supported view into the gearbox.

  • Modification of the attachment points of the mixing arms and the side scrapers, which has a positive effect on the service life of the mixing arms and the cleanliness of the mixing trough.
  • Further small improvements to optimize maintenance intervals and work.

S 350/500

  • Improved accessibility to the main drive of the mixing trough: The design of the lower steel frame was modified. Screw connections now make it easier to remove the side cover plate, which clears the way to the motor. The designers created the possibility to drive under the motor with a scissor jack, lower the motor and pinion, and drive out sideways. Locking screws ensure precise positioning of the pinion and ring gear during subsequent reassembly. Masa reduces the corresponding downtime by more than 50% with this modification.

  • Easy maintenance access to the Bluetooth probe: The Bluetooth probe, which is optionally available for the water dosing system, is positioned flush with the bottom of the mixing trough by means of a fastening ring. Depending on the degree of wear of the fastening ring and mixing trough lining, it may be necessary to adjust the probe. A small, easy-to-remove insert plate now allows direct and, above all, maintenance-friendly access from below, and the adjustment can be made using adjustment screws. For the plant operator, this means significant time savings during probe adjustment or probe replacement, which is an indispensable component to achieving reliable measurement results.

  • Improved motor accessibility: The drive motor for the rotating bottom cover of the mixing trough, which was previously mounted on the side, sits on a stand in the modified version and is now more easily accessible. The sealing joint on the closing lid is blown off so that the lid always closes cleanly.
  • Further small improvements to optimize maintenance intervals and work.

Read the full article "Milestones to success - Mixers with new, service-oriented features at bauma".
To the Masa Channel...